What You Need to Know About Motorcycle Engine Coolant

After spending a lot of time, effort, and money on rebuilding your motorcycle, you want to make sure you are doing what you can to keep it running smoothly. You took the time to get the right 125cc 4 stroke engine reverse for your vehicle, and now you need to keep it running optimally.

One of the best ways to do that is to make sure you are using engine coolant. When it comes to this element, there is a lot of misinformation in the world. Below are the things you need to know and how to use engine coolant properly to keep your bike running for as long as possible.

You’ll Need to Replace it at Some Point

For whatever reason, there is a myth floating around that says you don’t have to replace the engine coolant. This is completely false, and if you don’t change the coolant often, it could lead to engine failure.

If you ride your bike often, it’s recommended that you check your coolant twice a year: once right before summer and once before winter. If you don’t change your coolant regularly, it will break down and develop rust. If this happens, it could lead to corrosion in the cooling system and other issues with your 125cc 4 stroke engine reverse.

You Need to Pay Attention to the Coolant’s Color

Coolant comes in a wide range of colors, and each one represents a different formulation. The most common types of coolant for your motorcycle includes polypropylene glycol and ethylene glycol. More often than not, polypropylene glycol is the one you should add to your motorcycle engine, and you’ll want to look for one that doesn’t contain phosphates or silicates.

Once you have added one color of coolant to your engine, you need to stick with that specific color—unless you completely flush out the system. This will ensure that the coolant works the way it should, to keep your bike running smoothly and efficiently.

Water Is Not the Same as Coolant

You may hear some people say that you can add water to your 125cc 4 stroke engine reverse instead of coolant to save some money. This is one of the worst things you can do to your motorcycle.

Water can create rust, which can lead to corrosion and engine failure. It also has a low boiling point, which means that if you use water in a warm climate, you increase the chances of your engine overheating. If you live in a cold climate, the water in your engine could freeze, which could lead to radiator vein blockages and cooling system failure.

It may be a little more expensive to add coolant to your motorcycle, but in the long run, you will save money. Water is never a good option to add to your engine, and it can lead to a lot of problems.

Do What’s Best for Your Bike

Adding coolant to your 125cc 4 stroke engine reverse is the best way to ensure that your bike runs the way it’s supposed to for as long as possible. It’s recommended that you change the coolant every 2 to 3 years, but you’ll need to keep an eye on the levels and add more when they get low.

You’ve spent a lot of time rebuilding your bike. Adding the right coolant is a simple step that will keep your bike running smoothly for years.

Leave a Reply

*

Close Menu